µ Tip TM Borosilicate glass micropipettes µ Tip TM 平接口或者螺紋接口
Eliminate the cost and
trouble of making your own micropipettes – WPI can quickly supply your
need for consistently sized pre-pulled glass micropipettes for injection
of dyes or proteins into cells, oocytes and for many other biomedical
laboratory applications. Tip diameters （ID）range from 0.1 to 10 micrometers.
• Schott Duran
borosilicate glass
• 0.5 micrometer and
smaller ID micropipettes include an internal glass fiber for easy filling
• Tip inner
diameter tolerance ±20%
• Short taper
yields high strength
• Nominal length
≈ 50 mm
• OD：ID = 1.33：1
• Standard
capillary outer diameters are 1.0 mm （thin-wall）or 1.14 mm
• Every pipette
individually tested and inspected
• Vancuum packed
Silanized
Tips （Luer Shank）
Silanization
waterproofs the glass to retard water when inserting into cell. This will
not let the out-side fiuid run down the pipette and get inside so easily.
|
Shank |
Tip LD. |
Shank Length |
Glass O.D. |
Filament |
Fire Polished |
Catalog # |
|
PLAIN |
0.1 μm |
- |
1.0 mm Thin-Wall |
Yes |
No |
TIP01TW1F |
|
|
0.2 μm |
- |
1.0 mm Thin-Wall |
Yes |
No |
TIP02TW1F |
|
|
0.3 μm |
- |
1.0 mm Thin-Wall |
Yes |
No |
TIP03TW1F |
|
|
0.4 μm |
- |
1.0 mm Thin-Wall |
Yes |
No |
TIP04TW1F |
|
|
0.5 μm |
- |
1.0 mm Thin-Wall |
Yes |
No |
TIP05TW1F |
|
|
1 μm |
- |
1.0 mm Thin-Wall |
No |
Yes |
TIP1TW1 |
|
|
2 μm |
- |
1.0 mm Thin-Wall |
No |
Yes |
TIP2TW1 |
|
|
5 μm |
- |
1.0 mm Thin-Wall |
No |
Yes |
TIP5TW1 |
|
|
10μm |
- |
1.0 mm Thin-Wall |
No |
Yes |
TIP10TW1 |
|
|
10μm |
- |
1.14 mm A203XV glass* |
No |
Yes |
TIP10XV119 |
|
|
30μm |
- |
1.0 mm Thin-Wall |
No |
Yes |
TIP30TW1 |
|
LUER |
0.1μm |
- |
1.0 mm Thin-Wall |
Yes |
- |
TIP01TW1F-L |
|
|
0.2μm |
- |
1.0 mm Thin-Wall |
Yes |
- |
TIP02TW1F-L |
|
|
0.3μm |
- |
1.0 mm Thin-Wall |
Yes |
- |
TIP03TW1F-L |
|
|
0.4μm |
- |
1.0 mm Thin-Wall |
Yes |
- |
TIP04TW1F-L |
|
|
0.5μm |
- |
1.0 mm Thin-Wall |
Yes |
- |
TIP05TW1F-L |
|
|
1μm |
- |
1.0 mm Thin-Wall |
No |
- |
TIP1TW1-L |
|
|
2μm |
- |
1.0 mm Thin-Wall |
No |
- |
TIP2TW1-L |
|
|
5μm |
- |
1.0 mm Thin-Wall |
No |
- |
TIP5TW1-L |
|
|
10μm |
- |
1.0 mm Thin-Wall |
No |
- |
TIP10TW1-L |
|
|
30μm |
- |
1.0 mm Thin-Wall |
No |
- |
TIP30TW1-L |
|
LUER/SILANIZED |
5μm |
1 inch |
1.0 mm Thin-Wall |
No |
- |
TIP5TW1LS01 |
|
|
5μm |
2 inch |
1.0 mm Thin-Wall |
No |
- |
TIP5TW1LS02 |
|
|
10μm |
1 inch |
1.0 mm Thin-Wall |
No |
- |
TIP10TW1LS01 |
|
|
10μm |
2 inch |
1.0 mm Thin-Wall |
No |
- |
TIP10TW1LS02 |
|
|
30μm |
1 inch |
1.0 mm Thin-Wall |
No |
- |
TIP30TW1LS01 |
|
|
30μm |
2 inch |
1.0 mm Thin-Wall |
No |
- |
TIP30TW1LS02 |
• 10 μ （ID）, 1.14mm capillary pipettes are for use in WPI´s Nanliter 2000.
|
μTIP SAMPLER ASSORTMENTS |
|
|
TIPMIX01-05 |
Two each, 0.1, 0.2, 0.3, 0.4, 0.5 μm ID,plain shank |
|
TIPMIX05-10 |
Two each, 0.5, 1, 2, 5, 10 μm ID,plain shank |
|
TIPMIX01-05-L |
Two each, 0.1, 0.2, 0.3, 0.4, 0.5 μm ID,Luer |
|
TIPMIX05-10-L |
Two each, 0.5, 1, 2, 5, 10 μm ID,Luer |
